Please contact us!
Many people may not have heard of the micro switch, let alone know what it is, in fact, in our lives, is the need to use it frequently, as long as the electronic equipment, can not be separated from it. Today we will learn about what are the consider ...
The operation of a micro-switch is characterized by the fact that a very small force and a very small actuator movement are typically involved. Most use a stiff metal actuator strip supported by a spring which flips when a certain force on the switch ...
Needed for a circa 1980's Italian Glass Edger, fit perfectly ...
Are you looking for a reliable and efficient SSR relay to control your load current? The model XSSR-3DA4825 three-phase solid state relay is the product you need! The XSSR-3DA4825 can handle a maximum load current of 25A, with a load voltage of 480V ...
There are two types of photoelectric sensors, NPN output type (current flow) and PNP output type (current flow). When the current flow sensor (PNP output type) is switched on, the current flows from the power supply through the output of the sensor t ...
Foot switches are switches that operate the circuit on and off by pressing or stepping with the foot and can also be used to control the level of output current. This type of switch is widely used in automatic airtight doors. ...
Solid state relay load capacity by the ambient temperature and its own temperature rise, device use process, should ensure that it has good heat dissipation conditions, rated operating current in more than 10A products should be equipped with a heat ...
A foot switch is an on/off switch that uses the foot or feet to control the circuit, and its use in the hand cannot touch the control circuit to replace the hand for operational purposes. ...
Solid state relays are a new type of non-contact switching device composed entirely of solid-state electronic components, which use the switching characteristics of electronic components (such as switching transistors, thyristors and other semiconduc ...
In the specific application of processing plant, many people can not distinguish the difference between limit switch, photoelectric switch and proximity switch in the middle. ...
Switch is a product that we can see everywhere in our lives, the control of electricity after all, or the need for switch adjustment, we commonly switch are manual switch, then you have heard of foot switch? Foot switches are especially suitable for ...
Micro switch: A switch with a contact structure that has a tiny contact interval and a snap-action mechanism to switch with a specified stroke and a specified force, covered with an enclosure, and with a drive lever outside. (Hereinafter referred to ...
Solid state relays are "integrated" non-contact electronic switching devices consisting of integrated circuits and discrete components (check price|reference|preference). ...
A good electrical connection is achieved by plating the contacting parts of the two reeds with a very thick layer of a non-magnetic precious metal, low resistivity silver is a more suitable plating material than corrosion resistant gold. There are al ...
Once we mention limit switches, I believe we all probably know what limit switches are. With the development of science and technology, limit switches play an increasingly important role in our lives. ...
Nowadays, mercury switches are mainly used for horizontal control, anti-tilt control, displacement control and so on. In recent years, mercury switches are also more often used in exam cheating, and because of its small size, open variety, cheap, alt ...
First of all, the side of the switch with the toggle head to themselves, from left to right in order to toggle the first two third pins of the switch, the middle pin is the pin that must be connected. ...
Because displacement sensors can be made according to different principles and different methods, and different displacement sensors have different methods of "sensing" objects, there are several common types of proximity switches as follows. ...
First of all, it is clear that there are a total of three lines in the foot switch, mainly using them to connect, respectively, normally open line, normally closed line and the common line. The wiring method is very simple, just connect the normally ...
When selecting SSRs for use on printed circuit boards with low current specifications, as the lead terminals are made of highly thermally conductive materials, soldering should be carried out at a temperature of less than 250°C and for a period of le ...
Black is the information input, the blue line needs to be connected to the negative pole, the brown line needs to be connected to the positive pole, the white line is the public place, wired in numerous ways. ...
Micro switches are still relatively common in our lives, and what aspects should we pay attention to about its use principle and how to wire it, including when using it? The product officer will introduce the following aspects to you. ...
Solid State Relay (SSR for short) is a non-contact switch composed of microelectronic circuits, discrete electronic devices, and power electronic power devices. The isolation device is used to realize the isolation of the control end and the load end ...
Please contact us!